Join our mailing list!

  Home > SHELBY PARTS > GT500 SuperSnake >

  Shelby GT500 750HP "SuperSnake" Supercharger: Black
 

Bookmark and Share
 
Our Price: $6,499.99


Availability: Usually Ships in 7 to 10 Business Days
Product Code: Z16-KB-54-TSS
Qty:

Description
 
Factory original on the 2007-2009 Shelby GT500 SuperSnake* coupe, this black finished super charger turns out 750 horsepower to make your GT500 unstoppable!  This mammoth 1000hp+ super charger's inlet is designed for use with dual 75mm throttle body or allows the use of the stock 60mm throttle body.

Stage 1,2 and 3 variations are available allowing the widest power choices for street or competition application and giving you the option to choose your HP and Boost. With the 2.8H "Big Bore" billet twin screw, billet external bypass and 10 rib pulley an increase between 125-357hp can be achieved.

Fitting under the stock hood (minor notch on the X-brace required) and with no need for headers, cam, porting, etc., these kits offer the most ideal choice in overall power and performance.

There isn't a need for larger fuel pumps, fuel rails, fuel lines, etc. With the exclusive dual Boost-A-Pump fuel flow and SCT Flash Tuner, which is included each Shelby Kenne Bell Twin Screw Supercharger kit, you now can maximize performance with a true "Race Tune" calibration.

To top it all off each kit is designed to operate using stock emission components and meets most smog requirements. A quick and easy install makes each Shelby Kenne Bell Twin Screw Supercharger kit a practical investment in maximizing the overall performance of your Shelby GT500.

Applications:
2007-2009 Shelby GT500 coupe. For convertible GT500 applications, Shelby recommends the 605 HP version, which can be found here.

Notes:
• Black finish. Click here for the polished version.
* This super charger is branded for usage on a Shelby GT500.  It contains Shelby markings, but it does not contain "SuperSnake" markings.
 
Features
• Fits under stock hood*. *Notch on X brace required. No new hood or "Body Lift-Engine Lowering Kit" required.
• Most flexible kit design. Easy to “step up” for racing or “dial down” for street with easy pulley change or Kenne Bell bolt ons.
• Stage 3 Kit for widest power choices (540-801HP / 10-23 psi boost) and ALL the HP the car can handle.
• Largest (Dual 75mm) Throttle Body / Manifold for most HP, lowest parasitic losses and coolest air charge. Competition is limited to 60mm.
• Standard “Mammoth” Dual 75mm Inlet Manifold accepts exclusive Kenne Bell Dual 75mm or stock 60mm.
• Optional Kenne Bell designed Dual 75mm Throttle Body (+26-74HP low restriction meter/filter (48-63HP). Eliminates “mixing and matching” parts from others.
• Headers, cams, porting etc. not necessary. A 4 minute 1/4” size pulley change is 20-36HP depending on kit.
• BIG BORE™ 2.8H (2.0 PR). +56HP over 1.4 PR Twin Screws. Rated 1000HP.
• Black anodized.
• +125HP (606 vs. 481) over stock Eaton 122. Same 3” pulley and tune.
• +138HP (655 vs. 517) over stock Eaton 122. Same 2.6” pulley and tune. • + 357HP over stock (801 vs. 444). Stage 3 Kit 2.5” vs. stock Shelby 3”.
• Kenne Bell SCT Flash Tuner - Kenne Bell calibrated “RACE TUNE” included with each kit.
• Exclusive Kenne Bell Dual BOOST-A-PUMP™ included with all kits. Larger pumps, fuel rails, lines etc. not required.
• Smog Legal. EGR etc. not removed.
• Complete kit. No cobbling together a grab bag of parts and then paying a tuner to make it all work.

INCLUDES STAGE 3 KIT Replaces the stock restrictive 60mm throttle body and inlet tube with the Kenne Bell Dual 75mm Throttle Body and Big Oval Inlet Tube (+26-74HP depending on pulley size). +26HP (692 vs. 666) with the stock 3” pulley size. That’s almost 700HP at 15.5 psi. Then there are the optional, smaller pulleys. 2-7/8” (728HP), 2-3/4” (764HP) and 2-1/2” (801HP) - all the HP the stock engine and drivetrain can handle. This is truly a “max” performance kit. Note: Also includes everything in the Stage 1 & Stage 2 Kits. This kit only includes the 3.25" pulley - 15-16 psi.




NEED MORE INFO.? Click here for more features.

Related products:
Shelby Carbon Fiber Rocker Panel: Right Oil Gauge Adapter: 5.4L Engine, super charged engine Shelby Extreme Duty Heat Exchanger Shelby Extreme Brakes: Rear
Our Price: $471.95
Add
Our Price: $119.95
Add
Our Price: $770.00
Add
Our Price: $3,775.00
Add
Shelby GT500 Alcoa "SuperSnake" Wheel. Front, 20"x9" Shelby Aluminum Drive Shaft Eradispeed+2 Brake Set: Rear Shelby GT500 Alcoa "SuperSnake" Wheel. Rear, 20"x10"
Our Price: $494.99
Add
Our Price: $799.99
Add
Our Price: $695.00
Add
Our Price: $494.99
Add

Average Customer Review: Based on 1 reviewsWrite a review.

  1 of 1 people found the following review helpful:
 
No words to descibe this kit's power! February 14, 2010
Reviewer: michael vaughn from eufaula, AL United States  
Installation instructions are the best I've ever seen (not my 1st blower install) and the fitment of all parts was perfect. Some specialized tools are required for the install, but experienced home wrenchers can do the install.  I wish I had ordered the 3" pulley as the 3 1/4" did not clear my hood and I had to add a small notch for it as well.

Was this review helpful to you?


Browse for more products in the same category as this item:

SHELBY PARTS > GT500 SuperSnake
SHELBY PARTS > Super Chargers
SHELBY PARTS


Shelby billet engine cap set $274.95
Die cast: 2008 Shelby GT. Orange, 1/18th scale. $44.99
Shelby Collection Jewelry Silver Neckless Charm $9.99
Die cast: Shelby Special Edition "427 Nascar Race" GT500 SuperSnake. Red, 1/18th scale. $54.99
1:64th scale Shelby 2007 Ford Shelby GT Car (White w/Silver Stripe) Die Cast $12.95
Shelby GT500 Super Snake Two Pack 1:18th Remote Control Cars $34.99
Die cast: 2008 Shelby GT500 Super Snake. Orange with black stripes, 1/18th scale. $44.99
Book: 2008 World Registry of Cobras & GT40s $239.99
Washer nozzle covers $9.95