Shelby GT500 750HP "SuperSnake" Supercharger: Black

Our Price: $6,499.99

Availability: Usually Ships in 7 to 10 Business Days
Product Code: Z16-KB-54-TSS

Factory original on the Shelby GT500 SuperSnake*, this black finished super charger turns out 750 horsepower to make your GT500 unstoppable! This mammoth 1000hp+ super charger's inlet is designed for use with dual 75mm throttle body or allows the use of the stock 60mm throttle body.

Stage 1,2 and 3 variations are available allowing the widest power choices for street or competition application and giving you the option to choose your HP and Boost. With the 2.8H "Big Bore" billet twin screw, billet external bypass and 10 rib pulley an increase between 125-357hp can be achieved.

Fitting under the stock hood (minor notch on the X-brace required) and with no need for headers, cam, porting, etc., these kits offer the most ideal choice in overall power and performance.

There isn't a need for larger fuel pumps, fuel rails, fuel lines, etc. With the exclusive dual Boost-A-Pump fuel flow and SCT Flash Tuner, which is included each Shelby Kenne Bell Twin Screw Supercharger kit, you now can maximize performance with a true "Race Tune" calibration.

To top it all off each kit is designed to operate using stock emission components and meets most smog requirements. A quick and easy install makes each Shelby Kenne Bell Twin Screw Supercharger kit a practical investment in maximizing the overall performance of your Shelby GT500.

Applications:
2007-2009 Shelby GT500 coupe. For convertible GT500 applications, Shelby recommends the 605 HP version, which can be found here.

Notes:
• Black finish. Click here for the polished version.
* This super charger is branded for usage on a Shelby GT500. It contains Shelby markings, but it does not contain "SuperSnake" markings.

Features
• Fits under stock hood*. *Notch on X brace required. No new hood or "Body Lift-Engine Lowering Kit" required.
• Most flexible kit design. Easy to “step up” for racing or “dial down” for street with easy pulley change or Kenne Bell bolt ons.
• Stage 3 Kit for widest power choices (540-801HP / 10-23 psi boost) and ALL the HP the car can handle.
• Largest (Dual 75mm) Throttle Body / Manifold for most HP, lowest parasitic losses and coolest air charge. Competition is limited to 60mm.
• Standard “Mammoth” Dual 75mm Inlet Manifold accepts exclusive Kenne Bell Dual 75mm or stock 60mm.
• Optional Kenne Bell designed Dual 75mm Throttle Body (+26-74HP low restriction meter/filter (48-63HP). Eliminates “mixing and matching” parts from others.
• Headers, cams, porting etc. not necessary. A 4 minute 1/4” size pulley change is 20-36HP depending on kit.
• BIG BORE™ 2.8H (2.0 PR). +56HP over 1.4 PR Twin Screws. Rated 1000HP.
• Black anodized.
• +125HP (606 vs. 481) over stock Eaton 122. Same 3” pulley and tune.
• +138HP (655 vs. 517) over stock Eaton 122. Same 2.6” pulley and tune. • + 357HP over stock (801 vs. 444). Stage 3 Kit 2.5” vs. stock Shelby 3”.
• Kenne Bell SCT Flash Tuner - Kenne Bell calibrated “RACE TUNE” included with each kit.
• Exclusive Kenne Bell Dual BOOST-A-PUMP™ included with all kits. Larger pumps, fuel rails, lines etc. not required.
• Smog Legal. EGR etc. not removed.
• Complete kit. No cobbling together a grab bag of parts and then paying a tuner to make it all work.

INCLUDES STAGE 3 KIT Replaces the stock restrictive 60mm throttle body and inlet tube with the Kenne Bell Dual 75mm Throttle Body and Big Oval Inlet Tube (+26-74HP depending on pulley size). +26HP (692 vs. 666) with the stock 3” pulley size. That’s almost 700HP at 15.5 psi. Then there are the optional, smaller pulleys. 2-7/8” (728HP), 2-3/4” (764HP) and 2-1/2” (801HP) - all the HP the stock engine and drivetrain can handle. This is truly a “max” performance kit. Note: Also includes everything in the Stage 1 & Stage 2 Kits. This kit only includes the 3.25" pulley - 15-16 psi.